@sorena
21st May 2017, 18:03
2 SC CODE DESCRIPTIONS NOTE: This is a list of فتوکپی ریکو آفیشیو 3035 new and revised SC codes for فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) machines. For details about oفتوکپی ریکو آفیشیو 3035r SC codes please refer to Service Manual of فتوکپی ریکو آفیشیو 3035 previous models.
Code No.
Symptom
Possible Cause
320 (Deleted)
C
Polygon motor error
335
(New)
C
Polygonal Mirror Motor Error 1: ON Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on.
336
(New)
C
Polygonal Mirror Motor Error 2: OFF Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off.
337
(New)
C
Polygonal Mirror Motor Error 3: XSCRDY Signal Error
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms.
338
(New)
C
Polygonal Mirror Motor Error 4: Unstable Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed.
450
(New)
C
Feed Development Motor Error
Motor lock caused by overload.
Motor driver defective.
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
520
(New)
C
Fusing/Feed-Out Motor Error
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
Motor lock caused by overload.
Motor driver defective.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
818
(New)
B
Watch Dog Error
While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing.
System program defective
Controller board defective
Peripheral device malfunction
838 (Deleted)
B
Self-diagnostic Error: Clock Generator
840
(New)
C
Self-Diagnostic Error 1: EEPROM Access Error
EEPROM defective
EEPROM worn out
During input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
Write error occurred.
841
(New)
C
Self-Diagnostic Error 2: EEPROM Read/Write Data Error
• فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently
فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching..
853
(New)
B
Wireless LAN Error: Card Error 1
• Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board
فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board.
854
(New)
B
Wireless LAN Error Card Error 2
• Wireless LAN card has been removed
فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating
855
(New)
B
Wireless LAN Error 3: Card Error 3
Wireless LAN card defective
Wireless card connection not tight
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
856
(New)
Wireless LAN Error 4: Board
Wireless LAN card board defective
PCI connector loose
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
857
(New)
B
USB I/F Error
• فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code.
فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used.
870
(New)
B
Address Book Data Error
Software defective
HDD defective
Address book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
871
(New)
B
FCU Flash ROM Error
Flash ROM device defective
Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBU
فتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective.
880
(New)
B
MLB Error
• MLB defective
A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time.
920
(New)
B
Printer Error 1
An internal application error was detected and operation cannot continue.
Software defective
Insufficient memory
925
(New)
B
Network File Error
• NIA
NIA
964 (Revised)
C
Scanner Start Error
• Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received.
992
(New)
A
Unexpected Software Error
Software defective
An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurred
Software encountered an unexpected operation not defined under any SC code.
995
(New)
A
Machine Type Information Error
فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment.
After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
ELECTRICAL COMPONENT DEFECTS
Component (Symbol)
CN
Condition
Symptom
Scanner Home
Position (S1)
504-5(SIB)
Open
SC121 is displayed.
Shorted
SC120 is displayed.
Platen Cover (S2)
504-8 (SIB)
Open
APS and ARE do not function properly.
Shorted
No symptom.
Original Width (S3)
505-3, 4
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-1 (S4)
505-8,9
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-2 (S5)
505-13
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
LD Unit Home Position (S6)
204-B2
(IOB)
Open
SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Shorted
SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Toner Density (TD) (S7)
222-5 (IOB)
Open
فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit.
Shorted
SC390-01 is displayed.
Paper Exit (S8)
202-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Registration (S9)
224-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Shorted
فتوکپی ریکو آفیشیو 3035 فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Image Density (ID) (S10)
203-5
(IOB)
Open
SC350-03 is displayed after copying.
Shorted
SC350-01 is displayed after copying.
Upper Paper Height (S11)
220-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed.
Shorted
SC501-01 is displayed.
Lower Paper Height (S12)
214-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed.
Shorted
SC502-01 is displayed.
Upper Paper End (S13)
220-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2 ELECTRICAL COMPONENT DEFECTS
4.2.1 SENSORS BLOWN FUSE CONDITIONS
Component (Symbol)
CN
Condition
Symptom
Lower Paper End (S14)
214-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Upper Relay (S15)
220-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Lower Relay (S16)
214-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Transfer Belt Position (S19)
202-A10
(IOB)
Open
No symptom
Shorted
SC403 is displayed
4.2.2 SWITCHES
Component (Symbol)
CN
Condition
Symptom
Right Lower Cover (SW1)
216-4
(IOB)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed.
Shorted
فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened.
Main (SW3)
102-1~4 (PSU) 107-1
Open
فتوکپی ریکو آفیشیو 3035 machine does not turn on.
Shorted
فتوکپی ریکو آفیشیو 3035 machine does not turn off.
Front Cover Safety (SW4)
107-1
(PSU)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed.
Shorted
Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse
Rating
Symptom at power on
115V
210 ~ 230V
Power Su pply Board
FU1
6.3A / 125V
6.3A / 250V
Doors/Covers Open is displayed
FU2
6.3A / 125V
6.3A / 250V
Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed
FU3
6.3A / 125V
6.3A / 250V
Paper end condition
FU5
6.3A / 125V
6.3A / 250V
SC302, or SC403, or SC405 displayed
FU6
3.15A/125V
3.15A/250V
FU9
4A/125V
4A/250V
FU101
15A / 125V
---
No response
FU102
10A / 125V
5A / 250V
No response
FU103
2A / 125V
1A / 250V
Normal operation (optional heaters do not work)
LEDS 4.4 LEDS BICU LED Sequences
LED 101 (Green)
LED 102 (Red)
LED 103 (Orange)
Normal Operation
Flashes
Off
Flashes
System Startup
Flashes
On (1~2s) فتوکپی ریکو آفیشیو 3035n Off
Flashes
Firmware Update: Normal Execution
Flashes
On
Flashes
Firmware Update: Error
Flashes
Flashes
Flashes
Firmware Update: Normal End
Flashes
Off
Flashes
Energy Save Mode
Off
Off
Off
Controller LED Sequences
LED 1 (Red)
LED 2 (Red)
System Startup (including Self-Diagnostics)
On
Off
Self-Diagnostic Error
On
On
Normal Operation
Flashes
Off
Firmware Update: Normal Execution
Flashes
Flashes
Firmware Update: Error
Off
Off
Firmware Update: Normal End
On
On
NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
4.5 TEST POINTS Controller Board
Number
Monitored Signal
TP1
GND
TP3
GND
TP6
GND
TP8
DB0 RXD
TP9
DB0 TXD
TP10
GND
TP11
+5VE
TP12
GND
TP13
+5V
TP14
+5VE
TP15
GND
TP16
R_FGATE
TP17
W_FGATE
2 SC CODE DESCRIPTIONS NOTE: This is a list of فتوکپی ریکو آفیشیو 3035 new and revised SC codes for فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) machines. For details about oفتوکپی ریکو آفیشیو 3035r SC codes please refer to Service Manual of فتوکپی ریکو آفیشیو 3035 previous models.
Code No.
Symptom
Possible Cause
320 (Deleted)
C
Polygon motor error
335
(New)
C
Polygonal Mirror Motor Error 1: ON Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on.
336
(New)
C
Polygonal Mirror Motor Error 2: OFF Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off.
337
(New)
C
Polygonal Mirror Motor Error 3: XSCRDY Signal Error
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms.
338
(New)
C
Polygonal Mirror Motor Error 4: Unstable Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed.
450
(New)
C
Feed Development Motor Error
• Motor lock caused by overload.
• Motor driver defective.
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
520
(New)
C
Fusing/Feed-Out Motor Error
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
• Motor lock caused by overload.
• Motor driver defective.
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
818
(New)
B
Watch Dog Error
While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing.
• System program defective
• Controller board defective
• Peripheral device malfunction
838 (Deleted)
B
Self-diagnostic Error: Clock Generator
840
(New)
C
Self-Diagnostic Error 1: EEPROM Access Error
• EEPROM defective
• EEPROM worn out
During input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
• A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
• Write error occurred.
841
(New)
C
Self-Diagnostic Error 2: EEPROM Read/Write Data Error
• فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently
فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching..
853
(New)
B
Wireless LAN Error: Card Error 1
• Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board
فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board.
854
(New)
B
Wireless LAN Error Card Error 2
• Wireless LAN card has been removed
فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating
855
(New)
B
Wireless LAN Error 3: Card Error 3
• Wireless LAN card defective
• Wireless card connection not tight
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
856
(New)
Wireless LAN Error 4: Board
• Wireless LAN card board defective
• PCI connector loose
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
857
(New)
B
USB I/F Error
• فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code.
فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used.
870
(New)
B
Address Book Data Error
• Software defective
• HDD defective
Address book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
871
(New)
B
FCU Flash ROM Error
• Flash ROM device defective
• Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBU
فتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective.
880
(New)
B
MLB Error
• MLB defective
A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time.
920
(New)
B
Printer Error 1
An internal application error was detected and operation cannot continue.
• Software defective
• Insufficient memory
925
(New)
B
Network File Error
• NIA
NIA
964 (Revised)
C
Scanner Start Error
• Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received.
992
(New)
A
Unexpected Software Error
• Software defective
• An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurred
Software encountered an unexpected operation not defined under any SC code.
995
(New)
A
Machine Type Information Error
فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment.
After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
ELECTRICAL COMPONENT DEFECTS
Component (Symbol)
CN
Condition
Symptom
Scanner Home
Position (S1)
504-5(SIB)
Open
SC121 is displayed.
Shorted
SC120 is displayed.
Platen Cover (S2)
504-8 (SIB)
Open
APS and ARE do not function properly.
Shorted
No symptom.
Original Width (S3)
505-3, 4
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-1 (S4)
505-8,9
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-2 (S5)
505-13
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
LD Unit Home Position (S6)
204-B2
(IOB)
Open
SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Shorted
SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Toner Density (TD) (S7)
222-5 (IOB)
Open
فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit.
Shorted
SC390-01 is displayed.
Paper Exit (S8)
202-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Registration (S9)
224-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Shorted
فتوکپی ریکو آفیشیو 3035فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Image Density (ID) (S10)
203-5
(IOB)
Open
SC350-03 is displayed after copying.
Shorted
SC350-01 is displayed after copying.
Upper Paper Height (S11)
220-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed.
Shorted
SC501-01 is displayed.
Lower Paper Height (S12)
214-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed.
Shorted
SC502-01 is displayed.
Upper Paper End (S13)
220-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2 ELECTRICAL COMPONENT DEFECTS
4.2.1 SENSORS BLOWN FUSE CONDITIONS
Component (Symbol)
CN
Condition
Symptom
Lower Paper End (S14)
214-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Upper Relay (S15)
220-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Lower Relay (S16)
214-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Transfer Belt Position (S19)
202-A10
(IOB)
Open
No symptom
Shorted
SC403 is displayed
4.2.2 SWITCHES
Component (Symbol)
CN
Condition
Symptom
Right Lower Cover (SW1)
216-4
(IOB)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed.
Shorted
فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened.
Main (SW3)
102-1~4 (PSU) 107-1
Open
فتوکپی ریکو آفیشیو 3035 machine does not turn on.
Shorted
فتوکپی ریکو آفیشیو 3035 machine does not turn off.
Front Cover Safety (SW4)
107-1
(PSU)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed.
Shorted
Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse
Rating
Symptom at power on
115V
210 ~ 230V
Power Su pply Board
FU1
6.3A / 125V
6.3A / 250V
Doors/Covers Open is displayed
FU2
6.3A / 125V
6.3A / 250V
Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed
FU3
6.3A / 125V
6.3A / 250V
Paper end condition
FU5
6.3A / 125V
6.3A / 250V
SC302, or SC403, or SC405 displayed
FU6
3.15A/125V
3.15A/250V
FU9
4A/125V
4A/250V
FU101
15A / 125V
---
No response
FU102
10A / 125V
5A / 250V
No response
FU103
2A / 125V
1A / 250V
Normal operation (optional heaters do not work)
LEDS 4.4 LEDS BICU LED Sequences
LED 101 (Green)
LED 102 (Red)
LED 103 (Orange)
Normal Operation
Flashes
Off
Flashes
System Startup
Flashes
On (1~2s) فتوکپی ریکو آفیشیو 3035n Off
Flashes
Firmware Update: Normal Execution
Flashes
On
Flashes
Firmware Update: Error
Flashes
Flashes
Flashes
Firmware Update: Normal End
Flashes
Off
Flashes
Energy Save Mode
Off
Off
Off
Controller LED Sequences
LED 1 (Red)
LED 2 (Red)
System Startup (including Self-Diagnostics)
On
Off
Self-Diagnostic Error
On
On
Normal Operation
Flashes
Off
Firmware Update: Normal Execution
Flashes
Flashes
Firmware Update: Error
Off
Off
Firmware Update: Normal End
On
On
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
4.5 TEST POINTS Controller Board
Number
Monitored Signal
TP1
GND
TP3
GND
TP6
GND
TP8
DB0 RXD
TP9
DB0 TXD
TP10
GND
TP11
+5VE
TP12
GND
TP13
+5V
TP14
+5VE
TP15
GND
TP16
R_FGATE
TP17
W_FGATE
Code No.
Symptom
Possible Cause
320 (Deleted)
C
Polygon motor error
335
(New)
C
Polygonal Mirror Motor Error 1: ON Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on.
336
(New)
C
Polygonal Mirror Motor Error 2: OFF Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off.
337
(New)
C
Polygonal Mirror Motor Error 3: XSCRDY Signal Error
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms.
338
(New)
C
Polygonal Mirror Motor Error 4: Unstable Timeout
I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
Polygonal mirror motor or polygonal mirror motor driver defective.
Polygonal mirror motor drive pulse is not output incorrectly.
GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed.
450
(New)
C
Feed Development Motor Error
Motor lock caused by overload.
Motor driver defective.
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
520
(New)
C
Fusing/Feed-Out Motor Error
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
Motor lock caused by overload.
Motor driver defective.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
818
(New)
B
Watch Dog Error
While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing.
System program defective
Controller board defective
Peripheral device malfunction
838 (Deleted)
B
Self-diagnostic Error: Clock Generator
840
(New)
C
Self-Diagnostic Error 1: EEPROM Access Error
EEPROM defective
EEPROM worn out
During input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
Write error occurred.
841
(New)
C
Self-Diagnostic Error 2: EEPROM Read/Write Data Error
• فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently
فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching..
853
(New)
B
Wireless LAN Error: Card Error 1
• Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board
فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board.
854
(New)
B
Wireless LAN Error Card Error 2
• Wireless LAN card has been removed
فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating
855
(New)
B
Wireless LAN Error 3: Card Error 3
Wireless LAN card defective
Wireless card connection not tight
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
856
(New)
Wireless LAN Error 4: Board
Wireless LAN card board defective
PCI connector loose
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
857
(New)
B
USB I/F Error
• فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code.
فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used.
870
(New)
B
Address Book Data Error
Software defective
HDD defective
Address book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
871
(New)
B
FCU Flash ROM Error
Flash ROM device defective
Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBU
فتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective.
880
(New)
B
MLB Error
• MLB defective
A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time.
920
(New)
B
Printer Error 1
An internal application error was detected and operation cannot continue.
Software defective
Insufficient memory
925
(New)
B
Network File Error
• NIA
NIA
964 (Revised)
C
Scanner Start Error
• Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received.
992
(New)
A
Unexpected Software Error
Software defective
An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurred
Software encountered an unexpected operation not defined under any SC code.
995
(New)
A
Machine Type Information Error
فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment.
After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
ELECTRICAL COMPONENT DEFECTS
Component (Symbol)
CN
Condition
Symptom
Scanner Home
Position (S1)
504-5(SIB)
Open
SC121 is displayed.
Shorted
SC120 is displayed.
Platen Cover (S2)
504-8 (SIB)
Open
APS and ARE do not function properly.
Shorted
No symptom.
Original Width (S3)
505-3, 4
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-1 (S4)
505-8,9
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-2 (S5)
505-13
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
LD Unit Home Position (S6)
204-B2
(IOB)
Open
SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Shorted
SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Toner Density (TD) (S7)
222-5 (IOB)
Open
فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit.
Shorted
SC390-01 is displayed.
Paper Exit (S8)
202-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Registration (S9)
224-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Shorted
فتوکپی ریکو آفیشیو 3035 فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Image Density (ID) (S10)
203-5
(IOB)
Open
SC350-03 is displayed after copying.
Shorted
SC350-01 is displayed after copying.
Upper Paper Height (S11)
220-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed.
Shorted
SC501-01 is displayed.
Lower Paper Height (S12)
214-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed.
Shorted
SC502-01 is displayed.
Upper Paper End (S13)
220-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2 ELECTRICAL COMPONENT DEFECTS
4.2.1 SENSORS BLOWN FUSE CONDITIONS
Component (Symbol)
CN
Condition
Symptom
Lower Paper End (S14)
214-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Upper Relay (S15)
220-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Lower Relay (S16)
214-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Transfer Belt Position (S19)
202-A10
(IOB)
Open
No symptom
Shorted
SC403 is displayed
4.2.2 SWITCHES
Component (Symbol)
CN
Condition
Symptom
Right Lower Cover (SW1)
216-4
(IOB)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed.
Shorted
فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened.
Main (SW3)
102-1~4 (PSU) 107-1
Open
فتوکپی ریکو آفیشیو 3035 machine does not turn on.
Shorted
فتوکپی ریکو آفیشیو 3035 machine does not turn off.
Front Cover Safety (SW4)
107-1
(PSU)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed.
Shorted
Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse
Rating
Symptom at power on
115V
210 ~ 230V
Power Su pply Board
FU1
6.3A / 125V
6.3A / 250V
Doors/Covers Open is displayed
FU2
6.3A / 125V
6.3A / 250V
Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed
FU3
6.3A / 125V
6.3A / 250V
Paper end condition
FU5
6.3A / 125V
6.3A / 250V
SC302, or SC403, or SC405 displayed
FU6
3.15A/125V
3.15A/250V
FU9
4A/125V
4A/250V
FU101
15A / 125V
---
No response
FU102
10A / 125V
5A / 250V
No response
FU103
2A / 125V
1A / 250V
Normal operation (optional heaters do not work)
LEDS 4.4 LEDS BICU LED Sequences
LED 101 (Green)
LED 102 (Red)
LED 103 (Orange)
Normal Operation
Flashes
Off
Flashes
System Startup
Flashes
On (1~2s) فتوکپی ریکو آفیشیو 3035n Off
Flashes
Firmware Update: Normal Execution
Flashes
On
Flashes
Firmware Update: Error
Flashes
Flashes
Flashes
Firmware Update: Normal End
Flashes
Off
Flashes
Energy Save Mode
Off
Off
Off
Controller LED Sequences
LED 1 (Red)
LED 2 (Red)
System Startup (including Self-Diagnostics)
On
Off
Self-Diagnostic Error
On
On
Normal Operation
Flashes
Off
Firmware Update: Normal Execution
Flashes
Flashes
Firmware Update: Error
Off
Off
Firmware Update: Normal End
On
On
NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
4.5 TEST POINTS Controller Board
Number
Monitored Signal
TP1
GND
TP3
GND
TP6
GND
TP8
DB0 RXD
TP9
DB0 TXD
TP10
GND
TP11
+5VE
TP12
GND
TP13
+5V
TP14
+5VE
TP15
GND
TP16
R_FGATE
TP17
W_FGATE
2 SC CODE DESCRIPTIONS NOTE: This is a list of فتوکپی ریکو آفیشیو 3035 new and revised SC codes for فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) machines. For details about oفتوکپی ریکو آفیشیو 3035r SC codes please refer to Service Manual of فتوکپی ریکو آفیشیو 3035 previous models.
Code No.
Symptom
Possible Cause
320 (Deleted)
C
Polygon motor error
335
(New)
C
Polygonal Mirror Motor Error 1: ON Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on.
336
(New)
C
Polygonal Mirror Motor Error 2: OFF Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off.
337
(New)
C
Polygonal Mirror Motor Error 3: XSCRDY Signal Error
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms.
338
(New)
C
Polygonal Mirror Motor Error 4: Unstable Timeout
• I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed.
450
(New)
C
Feed Development Motor Error
• Motor lock caused by overload.
• Motor driver defective.
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
520
(New)
C
Fusing/Feed-Out Motor Error
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
• Motor lock caused by overload.
• Motor driver defective.
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
818
(New)
B
Watch Dog Error
While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing.
• System program defective
• Controller board defective
• Peripheral device malfunction
838 (Deleted)
B
Self-diagnostic Error: Clock Generator
840
(New)
C
Self-Diagnostic Error 1: EEPROM Access Error
• EEPROM defective
• EEPROM worn out
During input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
• A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
• Write error occurred.
841
(New)
C
Self-Diagnostic Error 2: EEPROM Read/Write Data Error
• فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently
فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching..
853
(New)
B
Wireless LAN Error: Card Error 1
• Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board
فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board.
854
(New)
B
Wireless LAN Error Card Error 2
• Wireless LAN card has been removed
فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating
855
(New)
B
Wireless LAN Error 3: Card Error 3
• Wireless LAN card defective
• Wireless card connection not tight
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
856
(New)
Wireless LAN Error 4: Board
• Wireless LAN card board defective
• PCI connector loose
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth).
857
(New)
B
USB I/F Error
• فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code.
فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used.
870
(New)
B
Address Book Data Error
• Software defective
• HDD defective
Address book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No.
Symptom
Possible Cause
871
(New)
B
FCU Flash ROM Error
• Flash ROM device defective
• Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBU
فتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective.
880
(New)
B
MLB Error
• MLB defective
A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time.
920
(New)
B
Printer Error 1
An internal application error was detected and operation cannot continue.
• Software defective
• Insufficient memory
925
(New)
B
Network File Error
• NIA
NIA
964 (Revised)
C
Scanner Start Error
• Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received.
992
(New)
A
Unexpected Software Error
• Software defective
• An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurred
Software encountered an unexpected operation not defined under any SC code.
995
(New)
A
Machine Type Information Error
فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment.
After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
ELECTRICAL COMPONENT DEFECTS
Component (Symbol)
CN
Condition
Symptom
Scanner Home
Position (S1)
504-5(SIB)
Open
SC121 is displayed.
Shorted
SC120 is displayed.
Platen Cover (S2)
504-8 (SIB)
Open
APS and ARE do not function properly.
Shorted
No symptom.
Original Width (S3)
505-3, 4
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-1 (S4)
505-8,9
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
Original Length-2 (S5)
505-13
(SIB)
Open
CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly.
Shorted
LD Unit Home Position (S6)
204-B2
(IOB)
Open
SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Shorted
SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed.
Toner Density (TD) (S7)
222-5 (IOB)
Open
فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit.
Shorted
SC390-01 is displayed.
Paper Exit (S8)
202-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Registration (S9)
224-B2
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Shorted
فتوکپی ریکو آفیشیو 3035فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Image Density (ID) (S10)
203-5
(IOB)
Open
SC350-03 is displayed after copying.
Shorted
SC350-01 is displayed after copying.
Upper Paper Height (S11)
220-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed.
Shorted
SC501-01 is displayed.
Lower Paper Height (S12)
214-2
(IOB)
Open
Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed.
Shorted
SC502-01 is displayed.
Upper Paper End (S13)
220-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2 ELECTRICAL COMPONENT DEFECTS
4.2.1 SENSORS BLOWN FUSE CONDITIONS
Component (Symbol)
CN
Condition
Symptom
Lower Paper End (S14)
214-8
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray.
Upper Relay (S15)
220-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Lower Relay (S16)
214-5
(IOB)
Open
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made.
Shorted
فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper.
Transfer Belt Position (S19)
202-A10
(IOB)
Open
No symptom
Shorted
SC403 is displayed
4.2.2 SWITCHES
Component (Symbol)
CN
Condition
Symptom
Right Lower Cover (SW1)
216-4
(IOB)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed.
Shorted
فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened.
Main (SW3)
102-1~4 (PSU) 107-1
Open
فتوکپی ریکو آفیشیو 3035 machine does not turn on.
Shorted
فتوکپی ریکو آفیشیو 3035 machine does not turn off.
Front Cover Safety (SW4)
107-1
(PSU)
Open
Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed.
Shorted
Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse
Rating
Symptom at power on
115V
210 ~ 230V
Power Su pply Board
FU1
6.3A / 125V
6.3A / 250V
Doors/Covers Open is displayed
FU2
6.3A / 125V
6.3A / 250V
Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed
FU3
6.3A / 125V
6.3A / 250V
Paper end condition
FU5
6.3A / 125V
6.3A / 250V
SC302, or SC403, or SC405 displayed
FU6
3.15A/125V
3.15A/250V
FU9
4A/125V
4A/250V
FU101
15A / 125V
---
No response
FU102
10A / 125V
5A / 250V
No response
FU103
2A / 125V
1A / 250V
Normal operation (optional heaters do not work)
LEDS 4.4 LEDS BICU LED Sequences
LED 101 (Green)
LED 102 (Red)
LED 103 (Orange)
Normal Operation
Flashes
Off
Flashes
System Startup
Flashes
On (1~2s) فتوکپی ریکو آفیشیو 3035n Off
Flashes
Firmware Update: Normal Execution
Flashes
On
Flashes
Firmware Update: Error
Flashes
Flashes
Flashes
Firmware Update: Normal End
Flashes
Off
Flashes
Energy Save Mode
Off
Off
Off
Controller LED Sequences
LED 1 (Red)
LED 2 (Red)
System Startup (including Self-Diagnostics)
On
Off
Self-Diagnostic Error
On
On
Normal Operation
Flashes
Off
Firmware Update: Normal Execution
Flashes
Flashes
Firmware Update: Error
Off
Off
Firmware Update: Normal End
On
On
file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png
NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
4.5 TEST POINTS Controller Board
Number
Monitored Signal
TP1
GND
TP3
GND
TP6
GND
TP8
DB0 RXD
TP9
DB0 TXD
TP10
GND
TP11
+5VE
TP12
GND
TP13
+5V
TP14
+5VE
TP15
GND
TP16
R_FGATE
TP17
W_FGATE