---------- Post added at 04:33 ---------- Previous post was at 04:31 ----------
نمایش نسخه قابل چاپ
---------- Post added at 04:33 ---------- Previous post was at 04:31 ----------
Se tool testing version v1.1094 ( x10i,x10a,so-01b)
anybody with locked or not locked x10i,x10a,so-01b, please come here.
Greetings.
lets make some tests.
1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.
2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )
3.
power off phone.
go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.
press unlock.
when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
https://rapidshare.com/files/573768306/v1.1094.rar
please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )
originally posted by
the_laser
Code:
- finally sorted all issues with samsung cid26 emp-based phones.- added x10i,x10a,so-01b unlock using alternative security bypass. check FAQ post for all details. during promo period, cost is 0 ( zero ) credits. Promo period can be extended to forever.- support area can only be access from now on by using setool2 >= v1.1094 - fixed many minor and major bugs.
SETOOL2 SMARTCARD UPDATE REQUIRED, IF YOU STILL NOT DONE IT.
https://rapidshare.com/files/573768306/v1.1094.rar
Let's make some tests.
1.
download setool2 v1.1099
https://rapidshare.com/files/3246771165/v1.1099.rar
2.
make sure you have firmware with android 2.x, NOT 1.6.
flash required firmware, if needed.
3.
power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging"
connect phone to PC, install drivers from setool2 v1.1099 distr ( drivers\ADB_Drivers)
hint:
i suggest to import DisableADBNumbering.reg, however that is not required.
4.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
press unlock
follow program directions.
hint:
when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.
after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.
it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot, so
IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.
if not, well, repeat from start.
5.
during testing period procedure will be free, however testing period will be very short ( until i wake up ) and credits will be taken after that,depending on testing results.
we tested service thoroughly and all went fine, but... well, you got idea.
no any warranty, your phone can be killed,etc,etc,etc.
originally posted by
the_laser
Regards
Dynet
SEtool v1.1099 is out!
- added e10,e15,e16,u20 unlock using alternative security bypass. price 4 credits.
Download
اپدیت جدید setool v1.1101وارائه فلش رایگان گوشیهای lg
خبرخوب برای کاربران این باکس اینه که اقای لیزر تصمیم گرفته کارهای نرم افزاری گوشیهای lg رو هم بصورت رایگان به ساپورت باکس اضافه کنه
- added lt15,mt15,r800 (and other semc models based on MSM8255) unlock using alternative security bypass.
check FAQ post for all details.
procedure require internet access and paid.
- added pnx4910-based phones support (ck15_txt_pro at the moment).
supported all standard operations, network unlock, as usual, will only work when s1 signature server will work.
- fixed ancient bug with lg3g testpoint operations http://forum.gsmhosting.com/ubb/wink.gif
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT
لینک دانلود:
SEtool2 v1.1102 Beta test !!.
Whats new
Code:
SEtool2 v1.1102 repair phone recovery empty semcboot area.
https://rapidshare.com/#!download|65...40|v1.1102.rar
SE-Tool v1.1104 added unlock code request by IMEI. v1.1104
Quote:
- added unlock code request by IMEI.
request cost - 10 credits, turnaround maximum 3 days.
how to do:
go to LOCKS tab, fill IMEI, press "REQUEST" button.
after ~1 day, check if request done: again fill IMEI and press request.
if code will not be ready in 72 hours from request, credits will be automatically returned to account,
when user check credits information.
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.
Download here
BR!
F@RUK S.
New Setool v1.1106v1.1106
Code:
- improved semcboot recovery for 8x55-based phones. - implemented script operations, format trim area operations, dump flash operations for 8x55 phones using alternative security bypass method. That allow fix phones with damaged trim area and many other interesting features. - simplified 8x55-based phones unlock, now need connect phone one time only.
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.
RapidShare Link
GOOD LUCK for ALL.
Br Momo.
ورژن جدید اسیتول v1.1107منتشرشد
بازهم ورژن جدید اسیتول منتشر شد ظاهرا لیزر از این کار خوشش میاد از دیروز این دومین بار
SETOOL v1.1108
- from now on, unlock by altbypass method for qsd8250,msm7227 phones will also "unlock" semcboot.
- qsd8250,msm7227 phones with "unlocked" bootloader can flash custom firmwares now
- added few models to model list, so users don't get confused
- different bugfixes, some are important.
For more info check here
https://rapidshare.com/#!download|16...2513646939|0|0
اینم لینک مستقیم:
http://www53.multiupload.com:81/file...55/v1.1108.rar
SETOOL v1.12 HOT UPDATE RELEASED v1.12
Quote:
- added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
- added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
resurrection procedure will be described in FAQ later,
however, in short it is standard "recovery+write gdfs+unlocking" chain.
7227,8250-based phones require special uart cables ( pinout included in docs ),
however it is highly recommended to use special GPG cables
8x55-based phones does not require any special cables.
as side effect, imei change possible now for s1 qualcomm-based phones.
for 7227,8250-based phones need select COM as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking, use testpoint (gnd type) )
for 8x50-based phones need select USB as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking )
cost of imei change 5 credits, please take in mind, that if you change imei, phone need to be unlocked,
so add another 5 credits for unlock procedure.
if you have calculated signature for some imei, then you can save 5 credits for unlocking http://forum.gsmhosting.com/ubb/wink.gif
- added few models to model list, so users don't get confused
- different bugfixes
RapidShare Link
setool v1.1201 - resurrection procedure will now work for totally erased s1 qualcomm-based phones FAQ now have resurrection procedure example. - forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, if setool2 smartcard installed in such reader. There is no any workaround. Use om****y-based reader or other normal reader.
https://rapidshare.com/files/3307035856/v1.1201.rar
Br
Faisal_Computer
SETOOL v1.1202 UPDATE RELEASED v1.1202
Code:
- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug. resurrection cables will NOT work for MCUs with fixed security bug. Because of this, phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot. big thanks for help and testing to electrolandgsm. - switch to usb interface was broken for DB200x phones, fixed. - added few models to list, so users can use profiles for them.
RapidShare Link
SE Tool v1.1203
v1.1203
-testpoint altbypass method will work now for msm7227-based phones,which using MCUs with fixed security bug.
that means, resurrection cables will work for MCUs with fixed security bug.
- fixed problem with FOTA upgrade for msm8x55-based phones, unlocked by altbypass
Download
https://rapidshare.com/files/3023120365/v1.1203.rar
لینک مستقیم
v1.1291
نقل قول:
- msm7227,qsd8250 altbypass unlock using USB was broken somehow. fixed. greatly sorry..
- backup folder will be created now for j108 bypass during step 2, no need to make identify before procedure now.
- pnx5230 altbypass unlock could kill some phones ( theoretically ). fixed
SGTOOL 1.05 released - Unlock for more then 30 SAMSUNG models added!
SGTOOL
by SEtool team
Version 1.05 released!
New version highlights:
Added unlock support for 30+ new SAMSUNG models!
Improved Windows Seven compatibility.
DIRECT DOWNLOAD LGTOOL & SGTOOL
DOWNLOAD LGTOOL & SGTOOL from RAPIDSHARE
New for SGTOOL direct services:
SAMSUNG WCDMA SCH-W720, SCH-W740, SCH-W750, SCH-W760, SCH-W770, SCH-W780, SCH-W850, SCH-W860, SCH-W880,
SCH-W890, SCH-W900, SCH-W920, SCH-W930, SCH-W940, SHW-A130S, SHW-A160S, SHW-A180S, SHW-A210S, SHW-A220S, SHW-A250S
- Direct Unlock
SAMSUNG S5690M, S5839i, S6802
- Direct Unlock
- Repair IMEI
SAMSUNG I9250, SC05D, SC06D (Need Root)
- Direct Unlock
SAMSUNG T249R, T369R, E2121L, E1087T, E1200, E1232
- Read E2p Codes via uart cable
Other important changes in SGTOOL:
- Fixed some bugs on on Broadcomm Android unlock
- Add Patern lock Bypass via Uart Cable
- Internal changes communicating with server for improve calculation
- Win7 x64 support added (Now do not use "Win XP compatibility" mode, but still run under administrator rights.)
- LGtool updated to 1.74
LGTool Official Support Forum
LGTool Official Website
FREE unlock by IMEI/MEID/ESN/MSN/SN for LG, Alcatel, ZTE, HTC, SE, Pantech, BlackBerry, Doro, Avvio, Motorola, Micromax and Huawei phones still free.
We are giving you an opportunity to earn some money before purchase.
This way you can decide if you really need to buy our software or it s not needed.
Please take two seconds of your time to say few words about us in "best LG box" thread.
Your opinion is always necessary for our team!
Please post feedback about LGtool!
ابدیت جدید
v1.1403.rar
https://rapidshare.com/share/F4AFA00003F631CB4A61B4B3E870C402
http://www.mediafire.com/download/rz...8c/v1.1403.rar
v1.1404
Code:- changed internal ADB server tcpip port, this can help to avoid ADB connection errors
during second step of msm8250,msm7227,msm722xA altbypass unlock, when other programs interfering with setool2.
RapidShare Link
setool update v1.1435
- fixed MT6762-based models operations
دانلود
setool update v1.1436
- fixed ancient bug for ancient phones - now you can change IMEI for P1,P990,M600,G700,G900 http://aria-gsm.com/images/smilies/wink.png
MEGA