آخرین اخبار و آپدیتهای باکس
Cyclone
در این تاپیک قرار می گیرد
نمایش نسخه قابل چاپ
آخرین اخبار و آپدیتهای باکس
Cyclone
در این تاپیک قرار می گیرد
Hi,
new update is released.
- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
- The NCK length is now automatically recognized upon RPL write, so correct NCK array length might be assumed
- Minor changes and bug fixes
NOTE
Auto update should do the job, in case of any problems (or interrupted update) you can manually download exe from
HERE and place in C:\Program Files\Cyclone Box\
PS
bigger bomb is on the way so stay tune http://forum.gsmhosting.com/ubb/wink.gif
Best Regards,
Cyclone Team
Cyclone Box Exclusive Blackberry Update Released Hi, new firmware v01.78 was just loaded at server.
What's new?
- Added support for Blackberry MEP-06041-016, WORLD'S FIRST
- Added support for Blackberry MEP-42490-001, WORLD'S FIRST
Upgrade your box using Box Maintenance and Enjoy ;-)
More to come,
Best Regards,
Cyclone Box Team
Cyclone Box Exclusive Blackberry Update Released (25-10-2011) Hi, new firmware v01.78 was just loaded at server.
What's new?
- Added support for Blackberry MEP-06041-016, WORLD'S FIRST
- Added support for Blackberry MEP-42490-001, WORLD'S FIRST
Upgrade your box using Box Maintenance and Enjoy ;-)
More to come,
Best Regards,
Cyclone Box Team
Cyclone Box Broadcom Unlocker Released
Hi, new update for Cyclone Box is ready.
Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them).
After read Unique Data you can:
- Unlock SP locks by reading LBF data
- Backup FULL RPL (including superdonlge) 100% Nokia-Like
- Repair corrupted Superdongle keys
- Authorize your phone with SX4 emulation inside box
- Detailed Security Analysis
- Downgrade this phones
- More ...
X2 Example Uni Data read and Security operation
Quote:
Started Phone Security Analysis...
[Nokia X2-00 USB Phonet]: Port opened OK!
MCU Version V 04.90
MCU Date 28-09-10
Product RM-618 (Nokia X2-00)
Manufacturer (c) Nokia
IMEI 352699049966024
Mastercode 554352325
Reading Security Block...
Security block OK and saved to "RM-618_352699049966024_2011-11-12_132245.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia X2-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
New ROM Detected
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 48400406073ECC4443B83B4151F972ABA08B3D66
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Cyclone Server (1.0.0.676), Cyclone Box Team 2008-2011 - Ready.
If phone doesn't powering into Local Mode now for some reason do following:
1. Re-insert battery
2. Power it on, when asked use Ovi/Pc Suite Mode
Readed OK, Saving to "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 "
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump.
PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data)
PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged.
Box firmware v01.82 is required to use this update.
Software and loaders should be automatically updated.
In case if you have aborted your update process, and now having problem with running app - you can download http://www.karwos.hk/updater/Cyclone.exe and place it in your Cyclone directory...
MORE COMING !!!
Best Regards,
Cyclone Box Team
Cyclone Box FREE and STANDALONE Broadcom Hash Read
Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
No internet connection and credits needed.
Just to remind Cyclone is one box which support all of hashes free and standalone now, this includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).
No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.
Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe
Firmware required, v01.82 (from Nov 12), no upgrade needed if u have one already.
Best Regards,
Cyclone Box Team
Cyclone Box Firmware v01.83 Released
Hi, new firmware is uploaded to server, no need download nothing, just upgrade your box by "box maintenance"
Added 2 World's First MEPs:
MEP-09917-003
MEP-46976-002
Enjoy Cyclonebox,
more to come,
Cyclonebox Team
Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added
Hi, new update for Cyclone Box is released.
What's new?
- Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST
- Nokia X1-00, X1-01, 100, 101, 102 flashing added
- 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters.
- When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up
- Minor changes and bugfixes
How to update?
Just run Cyclone, autoupdate will replace Cyclone.exe.
Join us on facebook: http://www.facebook.com/cyclonebox
More to come,
Best Regards,
Cyclone Box Team
Cyclone UPDATE AGAIN, Nokia 100/101/102 Unlock Added! Hi to all! New BOMB Update for Cyclone Box is ready Again!!
What's new ??
- Added support for unlock by LBF read for latest XGold113 Nokia Phones, this is Nokia 100, 101, 102, again WORLD FIRST
- Latest XGold110/113 phones is also supported to full RPL Read (IMEI + Simlock), so afterwards Simlock or IMEI could be fully restored - world's first too... Using RPL method also Keypad/FBUS counter might be resetted.
- Added support for Profile Bits analyze upon LBF dump for XGold1xx, so phones which will not accept code via neither keypad or FBUS handler - Log file will not be readen
- Minor changes and bugfixes
How to update?
1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
2. Also Firmware v01.85 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.
Join us on facebook: Cyclone Box | Facebook
Best Regards,
Cyclone Box Team
More to come...
Cyclone Box Iphone/Ipad Imei Analyzerhttp://www.siroya.org/images/2012-03...-free-imei.jpg
How to update?
Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
Join us on Facebook : Cyclone Box | Facebook
A little note for the Cyclone users: This is a free add on given to help you in your daily workshop duties so, please, use it only for personal use!. Opening thread about giving free iphones imei infos or merging already opened ones won't be accepted: we give you tools to make money and not to kill any market. Thanks for understanding
Cyclone Box Firmware v01.89 Released Hi, new Firmware for Cyclone Box Classic was just uploaded to server.
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Added support for new Blackberry MEPs:
MEP-09292-009
MEP-11534-009
Just use Box Maintenance to upgrade your box.
You have 5 tries to do that.
What else... server was rewritten almost from scratch few days back. That means uptime should be 99.9% right now, we eliminated major overload problems out there.
Join us on facebook: Cyclone Box | Facebook
Best Regards,
More to come,
Cyclone Box Team
[20-05-2012]CycloneBox Reloaded BlackBerry Module Updatedhttp://www.cyclonebox.com/images/cyclone-banner.png
Firmware v02.02 Released for Classic and Reloaded boxes!
-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
- Support for MEP-09292-008 Fixed!
Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff http://forum.gsmhosting.com/ubb/wink.gif
Cyclone HOT Update, Nokia N9 SECURITY FUNCTIONS ADDED!! Hi to all,
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss:
[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00
SX4 Authorization (Make sure FORCE SX4 SERVER iss TICKED)
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server
And just basic read info...
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one
Join us on facebook: Cyclone Box | Facebook
Stay tuned,
More to come,
Cyclone Team
Cyclone HOT Update, Nokia N9 World's First SECURITY FUNCTIONS ADDED!!http://cyclonebox.com/images/cyclone-banner.png
!!!!! World First Update !!!!!
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS
- Nokia N9 Phonet connectivity added, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added,
- Nokia N9 Security Repair Added (SX4+PM),
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added
- Nokia N9 PM Write Added
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes[/B]
NOTE :
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss :
Code:
[Nokia N9 USB Phonet]: Port opened OK! Security Code 12345 Attempts 00
SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)
Code:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 SX4 Status: Not authorized (74) Started mutual authenthication with card... Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready. Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button Disconnected from Cyclone Server
And just basic read info...
Code:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 IMEI Spare 3A75290314546404 IMEI SV 3375290314546404F0000000 CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343 PSN CZG234989 Product Code 059L7Z9 Module Code 0204965 Basic Product Code 059G8V7 PSD 0000000000000000 WLAN MAC 04A82A204D8F Bootcode 2.0.49 Camera 0b:0125:02 APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA. APE Test V 1.2.122 APE HW 1507 APE BT 00060000060d0020 RETU 11 TAHVO 00 AHNE 21 Asic 0 HW Signature Simlock Server Simlock Key 2440700000000000 Simlock Profile 0000000000000003 Simlock Aux Simlock IMEI Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Auto Selecting Flash Files on User Request... [Nokia N9 USB Phonet]: Port opened OK! Product Code: 059L7Z9 Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering DCT4 Products - wait... 5 Products left after filtering. Ready. Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering BB5 Products - wait... 8 Products left after filtering. Ready. This is Valid BB5 Product Retrieving Variants for Product RM-696 - wait... 1 Variants Retrieved No variant found with given Product Code, selecting first one
Join us on facebook : Cyclone Box | Facebook
Stay tuned,
More to come,
Cyclone Team
Cyclone Box Firmware v02.03 Released Hi, new firmware for Cyclone Box is ready.
What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE http://forum.gsmhosting.com/ubb/biggrin.gif
Just update your box using "Box Wizard".
Join us on facebook: Cyclone Box | Facebook
Best Regards,
Cyclone Box Team
Cyclone Box Installer v1.22 ReleasedHi, new update for Cyclone Box is ready.
=====================
Installer v1.22
09.11.2012
=====================
- New CPU support added, XGold223 (Asha 308, Asha309)
- Supported operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...
- Firmware v02.11 Released
- Lumia SmartTP(R) introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS), GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status! Very helpful during soldering time.
- New BB5 Loaders Added
- Lumia USB Flashing improved
- Latest Blackberry MEPs added
- Improved flashing speed and NPC certs reading time
- Improved CBUS protocol handling (sometimes it wents out of synchronization)
- Fixed BSI spurious glitch problem with ~2.x firmware
- Fixed DCT4 booting problems
- Improved FBUS Local Mode entry
- XGold213xx certificates Backup Added (NPC,HWC,CCC,...)
- XGold213xx Full Flash chip dump to BIN added
- XGold213xx Low-level PMM dump added (can dump PM from dead mobile)
- XGold213xx Low-Level FILESYSTEM dump from dead mobiles added. This dumps full FAT16 user data partition to BIN file for further actions (analysis, recovery, forensics, ...)
- Minor changes and bugfixes
Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will respons with empty public id (000000...) - very same story as with rapido). Battery reset needed, software will prompt you, but not always. Keep it noticed.
Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very TexasInstruments-Nokia like, but not really. Once loaders with assymetric key hack is not ready, you SHOULDN'T full erase your phone any way.
Autoupdate module SHOULD work, if not here is link: http://www.karwos.hk/CycloneBoxInstaller.exe
Firmware v02.11 is Mandatory