2 SC CODE DESCRIPTIONS
NOTE: This is a list of فتوکپی ریکو آفیشیو 3035 new and revised SC codes for فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) machines. For details about oفتوکپی ریکو آفیشیو 3035r SC codes please refer to Service Manual of فتوکپی ریکو آفیشیو 3035 previous models.
Code No. Symptom Possible Cause 320(Deleted)C Polygon motor error 335(New)C Polygonal Mirror Motor Error 1: ON Timeout
- I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
- Polygonal mirror motor or polygonal mirror motor driver defective.
- Polygonal mirror motor drive pulse is not output incorrectly.
- GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on. 336(New)C Polygonal Mirror Motor Error 2: OFF Timeout
- I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
- Polygonal mirror motor or polygonal mirror motor driver defective.
- Polygonal mirror motor drive pulse is not output incorrectly.
- GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off. 337(New)C Polygonal Mirror Motor Error 3: XSCRDY Signal Error
- I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
- Polygonal mirror motor or polygonal mirror motor driver defective.
- Polygonal mirror motor drive pulse is not output incorrectly.
- GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms. 338(New)C Polygonal Mirror Motor Error 4: Unstable Timeout
- I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
- Polygonal mirror motor or polygonal mirror motor driver defective.
- Polygonal mirror motor drive pulse is not output incorrectly.
- GABIC cannot monitor XSCRDY signal.
فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed. 450(New)C Feed Development Motor Error
- Motor lock caused by overload.
- Motor driver defective.
فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating. 520(New)C Fusing/Feed-Out Motor Error فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating.
- Motor lock caused by overload.
- Motor driver defective.
SERVICE CALL CONDITIONS
Code No. Symptom Possible Cause 818(New)B Watch Dog Error While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing.
- System program defective
- Controller board defective
- Peripheral device malfunction
838(Deleted)B Self-diagnostic Error: Clock Generator 840(New)C Self-Diagnostic Error 1: EEPROM Access Error
- EEPROM defective
- EEPROM worn out
During input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
- A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
- Write error occurred.
841(New)C Self-Diagnostic Error 2: EEPROM Read/Write Data Error • فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching.. 853(New)B Wireless LAN Error: Card Error 1 • Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board. 854(New)B Wireless LAN Error Card Error 2 • Wireless LAN card has been removed فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating 855(New)B Wireless LAN Error 3: Card Error 3
- Wireless LAN card defective
- Wireless card connection not tight
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth). 856(New)Wireless LAN Error 4: Board
- Wireless LAN card board defective
- PCI connector loose
An error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth). 857(New)B USB I/F Error • فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code. فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used. 870(New)B Address Book Data Error
- Software defective
- HDD defective
Address book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No. Symptom Possible Cause 871(New)B FCU Flash ROM Error
- Flash ROM device defective
- Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBU
فتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective. 880(New)B MLB Error • MLB defective A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time. 920(New)B Printer Error 1 An internal application error was detected and operation cannot continue.
- Software defective
- Insufficient memory
925(New)B Network File Error • NIA NIA 964(Revised)C Scanner Start Error • Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received. 992(New)A Unexpected Software Error
- Software defective
- An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurred
Software encountered an unexpected operation not defined under any SC code. 995(New)A Machine Type Information Error فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment. After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
ELECTRICAL COMPONENT DEFECTS4.2 ELECTRICAL COMPONENT DEFECTS
Component (Symbol) CNCondition SymptomScanner Home
Position (S1)504-5(SIB) Open SC121 is displayed. Shorted SC120 is displayed. Platen Cover (S2) 504-8 (SIB) Open APS and ARE do not function properly. Shorted No symptom. Original Width (S3) 505-3, 4
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted Original Length-1 (S4) 505-8,9
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted Original Length-2 (S5) 505-13
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted LD Unit Home Position (S6) 204-B2
(IOB)Open SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed. Shorted SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed. Toner Density (TD) (S7) 222-5 (IOB) Open فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit. Shorted SC390-01 is displayed.
Paper Exit (S8) 202-B2
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Registration (S9) 224-B2
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Shorted فتوکپی ریکو آفیشیو 3035 فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Image Density (ID) (S10) 203-5
(IOB)Open SC350-03 is displayed after copying. Shorted SC350-01 is displayed after copying. Upper Paper Height (S11) 220-2
(IOB)Open Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed. Shorted SC501-01 is displayed.
Lower Paper Height (S12) 214-2
(IOB)Open Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed. Shorted SC502-01 is displayed. Upper Paper End (S13) 220-8
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray. Shorted فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2.1 SENSORS
BLOWN FUSE CONDITIONS
Component (Symbol) CNCondition SymptomLower Paper End (S14) 214-8
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray. Shorted فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray. Upper Relay (S15) 220-5
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Lower Relay (S16) 214-5
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Transfer Belt Position (S19) 202-A10
(IOB)Open No symptom Shorted SC403 is displayed
4.2.2 SWITCHES
Component (Symbol) CNCondition SymptomRight Lower Cover (SW1) 216-4
(IOB)Open Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed. Shorted فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened. Main (SW3) 102-1~4 (PSU) 107-1 Open فتوکپی ریکو آفیشیو 3035 machine does not turn on. Shorted فتوکپی ریکو آفیشیو 3035 machine does not turn off. Front Cover Safety (SW4) 107-1
(PSU)Open Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed. Shorted Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse Rating Symptom at power on 115V 210 ~ 230VPower Su pply Board FU16.3A / 125V 6.3A / 250V Doors/Covers Open is displayed FU26.3A / 125V 6.3A / 250V Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed FU36.3A / 125V 6.3A / 250V Paper end condition FU56.3A / 125V 6.3A / 250V SC302, or SC403, or SC405 displayed FU63.15A/125V 3.15A/250V FU94A/125V 4A/250V FU10115A / 125V --- No response FU10210A / 125V 5A / 250V No response FU1032A / 125V 1A / 250V Normal operation (optional heaters do not work)
LEDS4.4 LEDS
BICU LED Sequences
LED 101 (Green) LED 102 (Red) LED 103 (Orange)Normal Operation Flashes Off Flashes System Startup Flashes On (1~2s) فتوکپی ریکو آفیشیو 3035n Off Flashes Firmware Update: Normal Execution Flashes On Flashes Firmware Update: Error Flashes Flashes Flashes Firmware Update: Normal End Flashes Off Flashes Energy Save Mode Off Off Off
Controller LED Sequences
LED 1 (Red) LED 2 (Red)System Startup (including Self-Diagnostics) On Off Self-Diagnostic Error On On Normal Operation Flashes Off Firmware Update: Normal Execution Flashes Flashes Firmware Update: Error Off Off Firmware Update: Normal End On On NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
4.5 TEST POINTS
Controller Board
Number Monitored Signal TP1 GND TP3 GND TP6 GND TP8 DB0 RXD TP9 DB0 TXD TP10 GND TP11 +5VE TP12 GND TP13 +5V TP14 +5VE TP15 GND TP16 R_FGATE TP17 W_FGATE
2 SC CODE DESCRIPTIONS
NOTE: This is a list of فتوکپی ریکو آفیشیو 3035 new and revised SC codes for فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) machines. For details about oفتوکپی ریکو آفیشیو 3035r SC codes please refer to Service Manual of فتوکپی ریکو آفیشیو 3035 previous models.
Code No. Symptom Possible Cause (Deleted)320C Polygon motor error 335(New)C Polygonal Mirror Motor Error 1: ON Timeout • I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (LOW: Active) within 25 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on. 336(New)C Polygonal Mirror Motor Error 2: OFF Timeout • I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.فتوکپی ریکو آفیشیو 3035 XSCRDY signal is not issued (HIGH: Inactive) within 2 s after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches off. 337(New)C Polygonal Mirror Motor Error 3: XSCRDY Signal Error • I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.فتوکپی ریکو آفیشیو 3035 XSCRDY is not issued (HIGH: Inactive) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor has been rotating normally for 600 ms. 338(New)C Polygonal Mirror Motor Error 4: Unstable Timeout • I/F harness of فتوکپی ریکو آفیشیو 3035 polygonal mirror motor disconnected or defective.
• Polygonal mirror motor or polygonal mirror motor driver defective.
• Polygonal mirror motor drive pulse is not output incorrectly.
• GABIC cannot monitor XSCRDY signal.فتوکپی ریکو آفیشیو 3035 XSCRDY signal is detected LOW) (Active) after فتوکپی ریکو آفیشیو 3035 polygonal mirror motor switches on, but فتوکپی ریکو آفیشیو 3035 signal is not detected LOW after 1 s has elapsed, and not detected after anoفتوکپی ریکو آفیشیو 3035r 500 ms has elapsed. 450(New)C Feed Development Motor Error • Motor lock caused by overload.
• Motor driver defective.فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating. 520(New)C Fusing/Feed-Out Motor Error فتوکپی ریکو آفیشیو 3035 PLL lock signal remains LOW for 2 s while فتوکپی ریکو آفیشیو 3035 feed development motor is operating. • Motor lock caused by overload.
• Motor driver defective.
[IMG]file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png[/IMG] SERVICE CALL CONDITIONS
Code No. Symptom Possible Cause 818(New)B Watch Dog Error While فتوکپی ریکو آفیشیو 3035 system program is running, a bus hold or interrupt program goes into an eternal loop, preventing any oفتوکپی ریکو آفیشیو 3035r programs from executing. • System program defective
• Controller board defective
• Peripheral device malfunction
(Deleted)838B Self-diagnostic Error: Clock Generator 840(New)C Self-Diagnostic Error 1: EEPROM Access Error • EEPROM defective
• EEPROM worn outDuring input/output with فتوکپی ریکو آفیشیو 3035 EEPROM, one of فتوکپی ریکو آفیشیو 3035 following errors occurred:
• A read error occurred, فتوکپی ریکو آفیشیو 3035n continued after 3 retries.
• Write error occurred. 841(New)C Self-Diagnostic Error 2: EEPROM Read/Write Data Error • فتوکپی ریکو آفیشیو 3035 data is being written into فتوکپی ریکو آفیشیو 3035 3 designated errors differently فتوکپی ریکو آفیشیو 3035 values of فتوکپی ریکو آفیشیو 3035 data written and mirrored in 3 errors are all detected as not matching.. 853(New)B Wireless LAN Error: Card Error 1 • Wireless LAN card not inserted into فتوکپی ریکو آفیشیو 3035 wireless LAN board فتوکپی ریکو آفیشیو 3035 wireless LAN board can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card (IEEE 802.11b or Bluetooth) cannot access فتوکپی ریکو آفیشیو 3035 board. 854(New)B Wireless LAN Error Card Error 2 • Wireless LAN card has been removed فتوکپی ریکو آفیشیو 3035 board that holds فتوکپی ریکو آفیشیو 3035 wireless LAN card can be accessed, but فتوکپی ریکو آفیشیو 3035 wireless LAN card
(802.11b/Bluetooth) itself cannot be accessed while فتوکپی ریکو آفیشیو 3035 machine is operating 855(New)B Wireless LAN Error 3: Card Error 3 • Wireless LAN card defective
• Wireless card connection not tightAn error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth). 856(New)Wireless LAN Error 4: Board • Wireless LAN card board defective
• PCI connector looseAn error is detected for فتوکپی ریکو آفیشیو 3035 wireless LAN card (802.11b or Bluetooth). 857(New)B USB I/F Error • فتوکپی ریکو آفیشیو 3035 USB driver can generate three types of errors: RX, CRC, and STALL errors. Only فتوکپی ریکو آفیشیو 3035 STALL error can generate this SC code. فتوکپی ریکو آفیشیو 3035 USB driver is unstable and generated an error. فتوکپی ریکو آفیشیو 3035 USB I/F cannot be used. 870(New)B Address Book Data Error • Software defective
• HDD defectiveAddress book data stored on فتوکپی ریکو آفیشیو 3035 hard disk was detected as abnormal when it was accessed from eiفتوکپی ریکو آفیشیو 3035r فتوکپی ریکو آفیشیو 3035 operation panel or فتوکپی ریکو آفیشیو 3035 network.
SERVICE CALL CONDITIONS
Code No. Symptom Possible Cause 871(New)B FCU Flash ROM Error • Flash ROM device defective
• Replace flash ROM on فتوکپی ریکو آفیشیو 3035 MBUفتوکپی ریکو آفیشیو 3035 address book written into فتوکپی ریکو آفیشیو 3035 flash ROM mounted on فتوکپی ریکو آفیشیو 3035 FCU is detected as defective. 880(New)B MLB Error • MLB defective A request for access to فتوکپی ریکو آفیشیو 3035 MLB (Media Link Board) was not answered within فتوکپی ریکو آفیشیو 3035 specified time. 920(New)B Printer Error 1 An internal application error was detected and operation cannot continue. • Software defective
• Insufficient memory 925(New)B Network File Error • NIA NIA (Revised)964C Scanner Start Error • Software defective
During scanned image processing, anoفتوکپی ریکو آفیشیو 3035r command to start scanning was received. 992(New)A Unexpected Software Error • Software defective
• An error undetectable by any oفتوکپی ریکو آفیشیو 3035r SC code occurredSoftware encountered an unexpected operation not defined under any SC code. 995(New)A Machine Type Information Error فتوکپی ریکو آفیشیو 3035 B079 (35 cpm) and B082 (45 cpm) use فتوکپی ریکو آفیشیو 3035 same controller board, but فتوکپی ریکو آفیشیو 3035 DIP SW settings must be set correctly for فتوکپی ریکو آفیشیو 3035 machine speed. For details, see Section 3. Replace and Adjustment. After فتوکپی ریکو آفیشیو 3035 machine is powered on, a mismatch is detected between فتوکپی ریکو آفیشیو 3035 CPM information sent from فتوکپی ریکو آفیشیو 3035 controller to فتوکپی ریکو آفیشیو 3035 engine and فتوکپی ریکو آفیشیو 3035 CPM information specified by فتوکپی ریکو آفیشیو 3035 DIP SW settings.
[IMG]file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png[/IMG] ELECTRICAL COMPONENT DEFECTS4.2 ELECTRICAL COMPONENT DEFECTS
Component (Symbol) CNCondition SymptomScanner Home
Position (S1)504-5(SIB) Open SC121 is displayed. Shorted SC120 is displayed. Platen Cover (S2) 504-8 (SIB) Open APS and ARE do not function properly. Shorted No symptom. Original Width (S3) 505-3, 4
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted Original Length-1 (S4) 505-8,9
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted Original Length-2 (S5) 505-13
(SIB)Open CPU cannot detect فتوکپی ریکو آفیشیو 3035 original size properly. APS and ARE do not function correctly. Shorted LD Unit Home Position (S6) 204-B2
(IOB)Open SC328 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed. Shorted SC327 is displayed when فتوکپی ریکو آفیشیو 3035 laser beam pitch is changed. Toner Density (TD) (S7) 222-5 (IOB) Open فتوکپی ریکو آفیشیو 3035 add toner indicator blinks even if فتوکپی ریکو آفیشیو 3035re is toner in فتوکپی ریکو آفیشیو 3035 development unit. Shorted SC390-01 is displayed.
Paper Exit (S8) 202-B2
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Registration (S9) 224-B2
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Shorted فتوکپی ریکو آفیشیو 3035فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Image Density (ID) (S10) 203-5
(IOB)Open SC350-03 is displayed after copying. Shorted SC350-01 is displayed after copying. Upper Paper Height (S11) 220-2
(IOB)Open Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC501-02 will be displayed. Shorted SC501-01 is displayed.
Lower Paper Height (S12) 214-2
(IOB)Open Add Paper is displayed even if فتوکپی ریکو آفیشیو 3035re is paper. If this condition occurred four times, SC502-02 will be displayed. Shorted SC502-01 is displayed. Upper Paper End (S13) 220-8
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 upper paper tray. Shorted فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 upper paper tray.
4.2.1 SENSORS
BLOWN FUSE CONDITIONS
Component (Symbol) CNCondition SymptomLower Paper End (S14) 214-8
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper End indicator lights even if paper is placed in فتوکپی ریکو آفیشیو 3035 lower paper tray. Shorted فتوکپی ریکو آفیشیو 3035 Paper End indicator does not light even if فتوکپی ریکو آفیشیو 3035re is no paper in فتوکپی ریکو آفیشیو 3035 lower paper tray. Upper Relay (S15) 220-5
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Lower Relay (S16) 214-5
(IOB)Open فتوکپی ریکو آفیشیو 3035 Paper Jam indicator will light whenever a copy is made. Shorted فتوکپی ریکو آفیشیو 3035 Paper Jam indicator lights even if فتوکپی ریکو آفیشیو 3035re is no paper. Transfer Belt Position (S19) 202-A10
(IOB)Open No symptom Shorted SC403 is displayed
4.2.2 SWITCHES
Component (Symbol) CNCondition SymptomRight Lower Cover (SW1) 216-4
(IOB)Open Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 right lower cover is closed. Shorted فتوکپی ریکو آفیشیو 3035 LCD goes blank when فتوکپی ریکو آفیشیو 3035 lower cover is opened. Main (SW3) 102-1~4 (PSU) 107-1 Open فتوکپی ریکو آفیشیو 3035 machine does not turn on. Shorted فتوکپی ریکو آفیشیو 3035 machine does not turn off. Front Cover Safety (SW4) 107-1
(PSU)Open Doors/Covers Open is displayed even if فتوکپی ریکو آفیشیو 3035 front cover is closed. Shorted Doors/Covers Open is not displayed even if فتوکپی ریکو آفیشیو 3035 front cover is opened.
4.3 BLOWN FUSE CONDITIONS
Fuse Rating Symptom at power on 115V 210 ~ 230VPower Su pply Board FU16.3A / 125V 6.3A / 250V Doors/Covers Open is displayed FU26.3A / 125V 6.3A / 250V Doors/Covers Open for فتوکپی ریکو آفیشیو 3035 finisher is displayed FU36.3A / 125V 6.3A / 250V Paper end condition FU56.3A / 125V 6.3A / 250V SC302, or SC403, or SC405 displayed FU63.15A/125V 3.15A/250V FU94A/125V 4A/250V FU10115A / 125V --- No response FU10210A / 125V 5A / 250V No response FU1032A / 125V 1A / 250V Normal operation (optional heaters do not work)
4.4 LEDSLEDS
BICU LED Sequences
LED 101 (Green) LED 102 (Red) LED 103 (Orange)Normal Operation Flashes Off Flashes System Startup Flashes On (1~2s) فتوکپی ریکو آفیشیو 3035n Off Flashes Firmware Update: Normal Execution Flashes On Flashes Firmware Update: Error Flashes Flashes Flashes Firmware Update: Normal End Flashes Off Flashes Energy Save Mode Off Off Off
Controller LED Sequences
LED 1 (Red) LED 2 (Red)System Startup (including Self-Diagnostics) On Off Self-Diagnostic Error On On Normal Operation Flashes Off Firmware Update: Normal Execution Flashes Flashes Firmware Update: Error Off Off Firmware Update: Normal End On On NOTE: LED 1 monitors Data Bus Bit 14, LED 2 monitors Data Bus Bit 15.
[IMG]file:///C:%5CUsers%5CRAYANE%7E1%5CAppData%5CLocal%5CTemp%5 Cmsohtmlclip1%5C01%5Cclip_image001.png[/IMG]
4.5 TEST POINTS
Controller Board
Number Monitored Signal TP1 GND TP3 GND TP6 GND TP8 DB0 RXD TP9 DB0 TXD TP10 GND TP11 +5VE TP12 GND TP13 +5V TP14 +5VE TP15 GND TP16 R_FGATE TP17 W_FGATE